It’s important to assess the nature of your ceiling cracks before you embark on any repair work. The good news is that in most cases, it’s relatively simple to patch up and restore the surface to its former glory. We’ve asked the experts for advice on how to fix ceiling cracks.

How to fix ceiling cracks – in 5 easy steps

Why is my ceiling cracking? is a question you should ask before you set about fixing it and you may need to fix a ceiling leak and get the details on how to fix a ceiling with water damage.  Of course, you may want to remove a popcorn ceiling – in which case you may like to consult our dedicated guide – or perhaps you just need to remove a textured ceiling, plaster a ceiling or patch a drywall ceiling you previously installed or inherited from your home’s previous owners.  Whichever, these easy step-by-step instructions will help you complete the task with ease. 

1. Consider your tools

Drop cloths/protective sheets A ladder or platform unit Dust mask and goggles A good quality flexible putty knife For larger cracks, mesh or fibreglass repair tape Joint compound, easy sand or ready-mixed filler Vacuum or brush Sand paper Cloth

2. Protect the area

When working with old plaster in particular, wear protective gear including a face mask and goggles. Be sure to cover walls and furniture with plastic. And lay down drop cloths so any dust and scrapings can be easily cleaned up afterwards.

3. Apply joint compound or filler 

The best thing to do with any type of crack is to make it ever-so slightly wider. This will ensure you ‘get enough easy sand into the crack for a substantial strong fill’, explains Nicholas Smacchia from Westchester-based company, Plastering by Nicholas (opens in new tab). Afterwards, ensure you have brushed or sanded out any debris before you apply joint compound or filler. Add joint compound or filler into the crack by applying with your putty knife and moving along the length of the gouge. Scrape off any excess by wetting the knife blade and scraping from the center to the edge. As you go, keep your putty knife clean, without a large build up of joint compound ‘this will avoid streaks in the filler on application’, explains Alex Glover, DIY Specialist at Lick (opens in new tab). If the ceiling crack you are dealing with is fairly wide, consider applying mesh or fiberglass repair tape over the crack. Then you can spread joint compound over the tape and smooth it out.

4. Dry and sand the area

Be sure to apply several thin layers of joint compound or filler as this will achieve better blending results. When it has dried, sand down the surface to create a flat, smooth finish. You can do this by hand, with a sanding block, or, to speed up the process, use an electric sander. Once finished, climb down from the ladder and stand back to ensure the surface of the ceiling looks even.

5. Finish and clean up 

Use the nozzle on your vacuum to clean the area you have filled, then wipe down with a cloth. Since there will be plenty of dust particles around the space, be sure to clean up the entire area before you attempt to paint.